IN STOCK
PROTECTIVE COATINGS
DensTop AK 232
Fast-drying protective-decorative elastic acrylic coating for exterior surfaces
PRICE
PRICE ON REQUEST
Leave a request — we will send a tailored commercial offer within 30 minutes
DensTop AK 232 is a single-component, solvent-containing acrylic product specifically developed to protect and decorate exterior surfaces when application is required at low temperatures or when the coating must be put into service quickly. The material is an acrylic dispersion that forms an elastic protective membrane after polymerization. It is intended for mineral construction substrates, including concrete, plaster, masonry and others.
✓Corrosion protection combined with decorative finishing of concrete elements of transportation structures, including bridge supports, barriers and other structures.
✓Protection of facades and other exterior surfaces of concrete elements in industrial and civil buildings and structures.
✓Effective protection against carbonation, freeze/thaw cycles, rainwater, marine climates, deicing chemicals, pollution and other environmental effects.
✓Protection of exterior surfaces with hairline and non-stabilized cracks.
✓Provides reliable, long-lasting protection against carbonation. Excellent resistance to CO2 penetration.
✓Forms a waterproof yet vapor-permeable coating that allows the surface to breathe.
✓The elasticity of the coating accommodates substrate movement and enables it to bridge existing and newly forming cracks.
✓High solids content provides effective corrosion protection with low material consumption.
✓Exhibits strong adhesion to most mineral construction materials.
✓Retains its self-cleaning properties for a long time and prevents surface contamination.
✓Enhanced UV and weather resistance.
✓Easy to apply by brush, roller or airless spray equipment.
✓The material is non-toxic.
APPEARANCEMatte uniform colored coating tintable according to RAL
DENSITY AT 20°C, KG/M³1200±50
VISCOSITY AT 23°C, PA·S3-5
SOLIDS CONTENT BY MASS, %50-55
BOND STRENGTH WITH CONCRETE SUBSTRATE, 7 DAYS, MPA>1,5 MPa
THICKNESS DRY FILM, ΜM60
THICKNESS WET LAYER, ΜM113
TECHNOLOGICAL INTERVAL BETWEEN COATS AT 20°C AND RELATIVE HUMIDITY 50%, H2-4
APPROXIMATE CONSUMPTION ON LAYER 60 ΜM, KG/M²0,2-0,21
MINIMUM/MAXIMUM AIR TEMPERATURE AND SUBSTRATE DURING APPLICATION, °C-10 / +35
// RELATED PRODUCTS
.jpg)
