IN STOCK
PRIMERS
DensTop EP 104
Two-component pre-filled epoxy primer for improving the adhesion of polyurethane and epoxy coatings to the substrate
PRICE
PRICE ON REQUEST
Leave a request — we will send a tailored commercial offer within 30 minutes
DensTop EP 104 — two-component low-viscosity preliminary filled epoxy compound. Is used as primer in floor-coating systems DensTop.
✓Primer in systems epoxy and polyurethane floor coatings by dry substrate.
✓Repair various type defects.
✓Dust removal concrete surfaces.
✓Sealing pores on substrates with high porous.
✓Seals pores concrete substrate, eliminates formation bubbles on finish polymer coatings.
✓Increases adhesion epoxy and polyurethane coatings to substrate.
✓Contains no solvents.
MIXING RATIO, AND:B, WT. H.4:1
CONSISTENCYViscous liquid
PROCESS INTERVAL BETWEEN APPLICATION LAYER AT 20°C, H12÷48
TIME MIXING, MIN3
AIR TEMPERATURE AND SURFACE DURING APPLICATION, °C+10 ÷ +30
DENSITY MIX AT 20°C, GRAMS/WITHM³1,39÷1,42
ADHESION TO CONCRETE, AFTER 7 DAYS, AT 20°C, MPA>4
POT LIFE AT 20°C, MIN40
VISCOSITY MIX AT 20°C, METERSPA·S800÷1200
CONTENT SOLIDS, % WT.100
DRYING TIME TO TACK-FREE AT 23°C AND RELATIVE HUMIDITY 50%, H6÷10
// RELATED PRODUCTS
.jpg)