IN STOCK
SEALANTS
Manodil PS 190 Flow
Chemical-resistant pourable polysulfide sealant
PRICE
PRICE ON REQUEST
Leave a request — we will send a tailored commercial offer within 30 minutes
Manodil PS 190 Flow — two-component floor pourable sealant cold curing with low modulus elasticity for horizontal joints, exposed intensive mechanical loads and action of aggressive substances.
✓Sealing construction joints;
✓Sealing connections precast structures;
✓Sealing reservoirs for water, channels, irrigation structures;
✓Sealing joints and connections structures bridges, overpasses, overpasses and other above-ground artificial structures;
✓Connections asphalt concrete linings with vertical structures bridges structures;
✓For joints brick masonry;
✓For joints, exposed exposure to aggressive environment;
✓For joints concrete structures;
✓For joints in floor coatings industrial buildings.
✓Curing occurs simultaneously by entire volume material;
✓Universal, also as has high indicator adhesion to most construction materials;
✓Elastic, thanks to than not creates internal stress by edges joint;
✓High physical-mechanical characteristics;
✓High chemical resistance and atmospheric;
✓After curing suitable for work in conditions permanent hydrostatic pressure in reservoirs, pools etc.;
✓Maintains elasticity in wide temperature interval operation from -60°C to 80°C.
APPEARANCEGray or black homogeneous paste
MIXING RATIO, AND:B, ABOUT. H.5:1
DENSITY MIX, KG/M³1550 ± 50
POT LIFE AT 23°C, MIN, NOT LESS THAN60
TIME FULL CURING (23°C, 50% RELATIVE HUMIDITY), H72
SHORE HARDNESS AND, CONDITIONS. UNITS., NOT LESS THAN35
STRENGTH LIMIT AT TENSION, MPA, NOT LESS THAN0,5
ELONGATION AT BREAK, %, NOT LESS THAN300
LIMIT ELONGATION IN JOINT, %, NOT LESS THAN50
INTERVAL TEMPERATURE SUBSTRATE AND AMBIENT ENVIRONMENT DURING APPLICATION, °C+5 / +30
TEMPERATURE RANGE OPERATION, °C-60 / +80
// RELATED PRODUCTS
