IN STOCK
INJECTION MATERIALS
Manopur 129 Thix
Two-component polyurethane resin with rapid viscosity build-up
PRICE
PRICE ON REQUEST
Leave a request — we will send a tailored commercial offer within 30 minutes
Manopur 129 Thix — two-component injection polyurethane resin with rapid time strength gain viscosity for work in waterlogged conditions and areas with strong flow water. After reaction with water and at use catalyst forms rigid waterproof foam. In dry conditions compound forms firmly elastic material with high strength. APPLICATION various catalysts allows control process leakage reaction and affects on final characteristics material.
✓Stopping active water in structures mining excavations;
✓Filling waterlogged voids during tunnel lining tunnels;
✓Elimination filtration water after cracks mining mass;
✓Elimination active filtration water after joints and cracks reinforced concrete structures hydroelectric plants, dams, dams, locks etc.;
✓Stopping leaks ground water (plugging);
✓Consolidation mining pores;
✓Elimination active leaks water under pressure in joints and cracks before injection elastic compound.
✓Very fast reaction time material allows perform work even at large hydrostatic pressure;
✓Thanks to rapid strength gain viscosity not washes out and forms uniform structure foam in strong flow water;
✓Can be used in cold water;
✓Is used as at large volume entry water, also and in dry conditions;
✓Possibility control speed reaction, volume foam, and also strength characteristics hardening material;
✓High service characteristics.
CONSISTENCYLiquid
COLORBrown
DENSITY MIX AT 20°C, KG/M³1100
COMPONENT RATIO AND:B, BY VOLUME1:1
VISCOSITY MIX, MPA·WITH — AFTER MIXING350
VISCOSITY MIX, MPA·WITH — AFTER 10 SECONDS AFTER MIXING2000
VISCOSITY MIX, MPA·WITH — AFTER 20 SECONDS AFTER MIXING4000
RATIO FOAMING WITHOUT WATER1
RATIO FOAMING WITH WATER — AT 10°C8
RATIO FOAMING WITH WATER — AT 20°C15
RATIO FOAMING WITH WATER — AT 30°C20
TIME START/END REACTION WITH WATER, S — AT 10°C60 / 80
TIME START/END REACTION WITH WATER, S — AT 20°C40 / 60
TIME START/END REACTION WITH WATER, S — AT 30°C20 /40
// RELATED PRODUCTS
