IN STOCK
LEVELING COMPOUNDS
Starmex Floor
One-component fast-hardening mortar for floor screeds
PRICE
PRICE ON REQUEST
Leave a request — we will send a tailored commercial offer within 30 minutes
Starmex Floor — one-component mortar on cement base. Starmex Floor has rapid strength gain strength and suitable for installation of floor screed floor at repair and new construction. Thickness application from 20 to 150 mm.
✓Leveling surface floors residential, office, industrial and warehouse premises under installation polymer cast-in-place floors, ceramic tiles, linoleum, carpet, laminate etc. Floor coatings.
✓Fast strength gain strength: after 3 hours after installation of screed by coating possible before builders, and after 5 days - installation floor coating (at temperature ambient environment 23°C and relative humidity 50%);
✓Mortar mix not separates;
✓Allows perform leveling surface during one pass;
✓High mechanical strength, non-shrinkage;
✓Ease application, mixes with water;
✓Not toxic.
WATER AMOUNT FOR MIXING, % WT.7,0
POT LIFE MORTAR MIX, MIN30
BULK DENSITY DRY MIX, KG/M³1700
DENSITY MORTAR MIX, KG/M³2190
STRENGTH LIMIT AT COMPRESSION, MPA — AFTER 1 DAY≥37,0
STRENGTH LIMIT AT COMPRESSION, MPA — AFTER 3 DAYS≥42,0
STRENGTH LIMIT AT COMPRESSION, MPA — AFTER 7 DAYS≥58,0
STRENGTH LIMIT AT COMPRESSION, MPA — AFTER 28 DAYS≥62,0
STRENGTH LIMIT AT BENDING, MPA — AFTER 28 DAYS≥10,0
BOND STRENGTH WITH CONCRETE SUBSTRATE, MPA≥0,5
DEFORMATION SHRINKAGE AFTER 28 DAYS, MM/METERS≤0,05
MINIMUM / MAXIMUM LAYER THICKNESS, MM20 / 150
TIME TO COMMISSIONING PROCESS BEFORE, H / INSTALLATION FLOOR COATING, DAYS, AT 23°C3/5
// RELATED PRODUCTS
.jpg)