IN STOCK
LEVELING COMPOUNDS
Starmex Flow 30
Fast-hardening self-leveling compound for final substrate leveling
PRICE
PRICE ON REQUEST
Leave a request — we will send a tailored commercial offer within 30 minutes
Starmex Flow 30 — self-leveling polymer mortar based on special cement. Starmex Flow 30 has high flowability and developed for installation of high screed floors with rapid strength gain strength. Suitable for preparation substrates before installation polymer and polymer finish floor coatings. Thickness application from 15 to 50 mm.
✓Installation screed floor industrial and warehouse premises, in areas parking areas, loading-unloading and other rooms with high loads;
✓Installation leveling screed before installation polymer cast-in-place floors, ceramic tiles, linoleum, carpet, laminate etc. Floor coatings.
✓Fast strength gain strength;
✓High resistance to mechanical loads;
✓Compensated shrinkage, resistance to cracks;
✓High flowability. Self-leveling compound. Not separates;
✓Can be used for exterior and internal work;
✓Suitable for dry and wet rooms;
✓Ease application, mixes with water;
✓Not toxic. Does not contain solvents. Not flammable.
WATER AMOUNT FOR MIXING, % WT.16±1
DENSITY MORTAR MIX, KG/M³2200±50
POT LIFE MORTAR MIX, MIN≥40
THICKENING TIME, MIN — START50
THICKENING TIME, MIN — END120
STRENGTH LIMIT AT COMPRESSION, MPA — AFTER 1 DAY≥10
STRENGTH LIMIT AT COMPRESSION, MPA — AFTER 7 DAYS≥25
STRENGTH LIMIT AT COMPRESSION, MPA — AFTER 28 DAYS≥35
STRENGTH LIMIT AT BENDING, MPA — AFTER 28 DAYS≥8
BOND STRENGTH WITH CONCRETE SUBSTRATE, MPA≥1,5
MINIMUM LAYER THICKNESS, MM15
MAXIMUM LAYER THICKNESS, MM50
TECHNOLOGICAL INTERVAL BETWEEN COATS, H8...24
TIME TO COMMISSIONING PEDESTRIAN TRAFFIC/COMMISSIONING PASSENGER VEHICLES VEHICLES/COMMISSIONING HEAVY MACHINERY AT 23°C, H4 / 24 / 48
// RELATED PRODUCTS
.jpg)