.jpg)
1/7
IN STOCK
WATERPROOFING
Starmex Plug
Fast-setting hydraulic mortar for stopping active leaks
PRICE
PRICE ON REQUEST
Leave a request — we will send a tailored commercial offer within 30 minutes
Starmex Plug — is fast-setting hydraulic cement-based mortar, designed for instant stopping water leaks, seeping after concrete and masonry. Material non-shrink, depending from temperature water mixing with water setting in throughout 3-5 min. Material supplied in type dry mix. For start work necessary only add water.
✓For immediate elimination active leaks.
✓For emergency repair water pipes. For elimination leaks under large pressure, including and under water.
✓For emergency repair gas.
✓For anchor fastening bolts and embedded parts, which necessary immediately use.
✓In under rooms, tunnels, sewer pipes for the purpose of elimination active leaks. Is used at repair work, as in residential buildings, also and in structures industrial intended use.
✓As repair mortar for filling surface defects structures, joints etc.
✓Stops leaks, increases in volume, and waterproofs surface.
✓Does not have shrinkage, not cracks and not loses strength characteristics during hardening.
✓Fast setting. Speed setting mortar can control, adding heat or cold water at mixing with water.
✓Non-toxic, can use at directly contact with drinking water.
✓Its mechanical characteristics comparable with characteristics concrete, and in some cases even exceed their.
✓Setting under water.
✓Easy to use in application.
✓Does not contain chlorides.
MAXIMUM AGGREGATE SIZE AGGREGATE, MM0,8
BULK DENSITY, KG/M³1100
WATER AMOUNT MIXING WITH WATER, % WT.28,0
TIME SETTING AT 20°C AND RELATIVE HUMIDITY 50%, MIN — START0,5
TIME SETTING AT 20°C AND RELATIVE HUMIDITY 50%, MIN — END2
STRENGTH LIMIT AT COMPRESSION/BENDING, MPA — AFTER 10 MIN4,2/0,8
STRENGTH LIMIT AT COMPRESSION/BENDING, MPA — AFTER 1 H6,5/1,2
STRENGTH LIMIT AT COMPRESSION/BENDING, MPA — AFTER 3 DAYS20,0/3,5
STRENGTH LIMIT AT COMPRESSION/BENDING, MPA — AFTER 7 DAYS33,0/4,8
STRENGTH LIMIT AT COMPRESSION/BENDING, MPA — AFTER 28 DAYS38,0/5,2
// RELATED PRODUCTS
.jpg)