IN STOCK
PRIMERS
DensTop EP 105 AS
Conductive water-based epoxy primer
PRICE
PRICE ON REQUEST
Leave a request — we will send a tailored commercial offer within 30 minutes
DensTop EP 105 AS — two-component low-viscosity epoxy water-based compound with conductive properties. Is used as primer at installation antistatic floors.
✓Primer in systems epoxy and polyurethane antistatic coatings floor for formation intermediate conductive layer.
✓High electrical conductivity priming layer.
✓Provides high Strength bond between coatings and substrate.
✓Small material consumption.
✓Contains no solvents.
✓Excellent adhesion to most substrates.
✓Vapor permeable.
DENSITY COMPONENT AND (EN ISO 2811) AT, GRAMS/WITHM³1,17
VISCOSITY COMPONENT AND (EN ISO 3219), MPA·WITH2800 - 3800
DENSITY COMPONENT B (EN ISO 2811) AT, GRAMS/WITHM³1,16
VISCOSITY COMPONENT B (EN ISO 3219), MPA·WITH4000
DENSITY MIX AND+B AT (EN ISO 2811), GRAMS/WITHM³1,16
VISCOSITY MIX AND+B (EN ISO 3219), MPA·WITH3200-3500
COMPONENT RATIO BY BY WEIGHT AND:B, WT..H.100:23
POT LIFE MIXED MATERIAL, MIN AT 20°C30
INTERCOAT INTERVAL, H AT 20°C24
DRYING TIME ON TACK-FREE, H AT 20°C3
APPEARANCEMatte black coating
ELECTRICAL RESISTANCE, MIXING102 - 104
ADHESION TO SUBSTRATE (28 DAYS), MPANot less than 2
AIR TEMPERATURE AND SURFACE DURING APPLICATION, °C+15 ÷ +30
// RELATED PRODUCTS
.jpg)