IN STOCK
POLYMER FLOORS
DensTop PM 605 Flow AS
Cement-polyurethane colored mortar for smooth antistatic coatings with high chemical resistance
PRICE
PRICE ON REQUEST
Leave a request — we will send a tailored commercial offer within 30 minutes
DensTop PM 605 Flow AS — is three-component cement-polyurethane self-leveling colored mortar water-based. Developed for installation of seamless antistatic smooth coating with excellent chemical resistance, resistance to abrasion, mechanical and thermal shock.
✓Industrial coating for paint and coating, pharmaceutical, food and other enterprises with requirements by explosion safety, to which also apply increased requirements by chemical resistance and mechanical strength.
✓Antistatic coating floors, under action of thermal impact and cyclic loads at spills hot liquids, high working temperatures, freezing and etc.
✓Antistatic industrial floors with very high chemical resistance to exposure to detergents, oils, dilute solutions alkalis and acids, hydrocarbons etc. Aggressive joints.
✓Wide temperature range operation: from -25°C to +70°C.
✓High mechanical strength, including compressive strength, abrasion resistance, resistance to impact loading and mechanical cleaning.
✓Excellent chemical resistance, higher than epoxy systems.
✓Can be used on new concrete substrates, after 7 days after installation of, and on slightly damp surfaces (to 8%).
✓Can be applied with a thickness from 4 to 6 mm depending from requirements to finished coating.
✓Forms a seamless coating without cold joints.
✓Fast commissioning (after 24 hours).
✓Eco-friendly, non-toxic, does not contain solvents and non-flammable.
APPEARANCE AND COLORPigmented cement-based mortar
MIXING RATIO A : B1 : B2, PARTS BY WEIGHT20 : 4,45 : 5,27
MIXTURE DENSITY AT 20°C, KG/M³1950±50
COMPRESSIVE STRENGTH, MPA, 28 DAYS≥50,0
TENSILE STRENGTH AT BENDING, MPA, 28 DAYS≥20,0
BOND STRENGTH WITH CONCRETE SUBSTRATE, MPA, 28 DAYS≥2,5
ELECTRICAL RESISTANCE*, MIXING<109
TYPICAL ELECTRICAL RESISTANCE*, MIXING<106
POT LIFE AT 20°C, MIN10
FULL CURING TIME AT 20°C AND RELATIVE HUMIDITY 50%, H — PEDESTRIAN TRAFFIC24
FULL CURING TIME AT 20°C AND RELATIVE HUMIDITY 50%, H — PASSENGER-CAR TRAFFIC48
FULL CURING TIME AT 20°C AND RELATIVE HUMIDITY 50%, H — HEAVY-EQUIPMENT TRAFFIC120
MINIMUM / MAXIMUM APPLICATION TEMPERATURE, °C+10 / +25
MINIMUM / MAXIMUM SERVICE TEMPERATURE, °C, AT THICKNESS 4 MM-15 / +60
MINIMUM / MAXIMUM SERVICE TEMPERATURE, °C, AT THICKNESS 6 MM-25 / +70
MAXIMUM RELATIVE HUMIDITY AIR DURING APPLICATION, %90
MINIMUM / MAXIMUM LAYER THICKNESS, MM4 / 6
CONSUMPTION, KG/M² ON 1 MM2,0-2,5
*Readings can vary depending from conditions ambient environment and measuring equipment.
// RELATED PRODUCTS
