IN STOCK
POLYMER FLOORS
DensTop PM 605 FK
Cement-polyurethane thixotropic compound for vertical coatings and polymer coves
PRICE
PRICE ON REQUEST
Leave a request — we will send a tailored commercial offer within 30 minutes
DensTop PM 605 FK — is three-component cement-polyurethane thixotropic compound for creation polymer coves and installation of on vertical surfaces coatings with excellent chemical resistance, resistance to abrasion, mechanical and thermal shock.
✓Installation polymer skirting and industrial coatings vertical surfaces for petroleum refining, pharmaceutical, food and other enterprises. Can use for structures domestic-drinking water supply, including in contact with drinking water.
✓Installation polymer skirting and industrial coatings vertical surfaces with high chemical resistance to exposure to detergents, oils, dilute solutions alkalis and acids, hydrocarbons etc. Aggressive joints.
✓Coating vertical surfaces, exposed exposure to thermal impact and cyclic loads, high working temperatures, freezing and etc.
✓Wider service-temperature range than epoxy coatings: from -40°C to +150°C.
✓High mechanical strength, including compressive strength, abrasion resistance, resistance to impact loading and mechanical cleaning.
✓Excellent chemical resistance, greater than that of epoxy flooring systems.
✓Can be used on fresh concrete (not less than, than after 7 days hardening).
✓Can be steam-cleaned when the layer thickness exceeds 9 mm.
✓Fast setting: commissioning after 24 hours.
✓Eco-friendly: non-toxic, does not contain solvents.
APPEARANCE AND COLORPigmented cement-based mortar
MIXING RATIO A : B1 : B2, PARTS BY WEIGHT15 : 1,35 : 1,55
MIXTURE DENSITY AT 20°C, KG/M³2100±50
COMPRESSIVE STRENGTH, MPA, 28 DAYS≥55,0
TENSILE STRENGTH AT BENDING, MPA, 28 DAYS≥15,0
BOND STRENGTH WITH CONCRETE SUBSTRATE, MPA, 28 DAYS≥2,0
POT LIFE AT 20°C, MIN10
FULL CURING TIME AT 20°C AND RELATIVE HUMIDITY 50%, H — PEDESTRIAN TRAFFIC24
FULL CURING TIME AT 20°C AND RELATIVE HUMIDITY 50%, H — PASSENGER-CAR TRAFFIC48
FULL CURING TIME AT 20°C AND RELATIVE HUMIDITY 50%, H — HEAVY-EQUIPMENT TRAFFIC120
MINIMUM / MAXIMUM SERVICE TEMPERATURE, °C — FROM 4 TO 9 MM-15 / +60
MINIMUM / MAXIMUM SERVICE TEMPERATURE, °C — FROM 9 TO 12 MM-40 / +120
MINIMUM / MAXIMUM SERVICE TEMPERATURE, °C — FROM 12 TO 15 MM-40 / +130*
MINIMUM / MAXIMUM APPLICATION TEMPERATURE, °C+10 / +25
MAXIMUM RELATIVE HUMIDITY AIR DURING APPLICATION, %90
MINIMUM / MAXIMUM LAYER THICKNESS, MM4 / 15
CONSUMPTION, KG/M² ON 1 MM**2,1
*Briefly to 150 °C
**Consumption depends from substrate characteristics.
// RELATED PRODUCTS
.jpg)
